Makita SP6000J Plunge Saw in Makpac Case 240v

Plunge cut saw with a powerful 1300W input motor, soft start and variable speed control. Electronic speed control automatically applies additional power to the motor to maintain constant speed under load to deliver up to 5800rpm for smooth cutting. Equipped with straight or bevel cutting; the blade enters the material on the same cutting line, with locking lever to hold the blade in position, so that the wrench can be inserted through the hole in the blade for easier installation. Depth adjustment and d... - Manufacturers part numbers: SP6000J2|SP6000J12

• 56mm max cut @ 90 / 40mm max cut @ 45 / 38mm @ 48. NOTE: The designation SP6000 in the operating instructions is correct, the instructions always refer to the basic model. The other letters behind the Model specification only refers to the scope of delivery. (Here: J = MAKPAC)
• 20mm blade bore
• 165mm diameter blade
• 2,000 - 5,800rpm no load speed
• 1,300W motor