GYS GYS Welding Torch Gas Flowmeter

This easy to use tool ensures you have the correct gas flow rate providing optimum gas shielding to the weld pool. Just insert the end of the MIG or TIG torch into the meter, press the torch trigger to activate the gas flow & the black ball will hover and a litres per minute reading can be taken from the graduated markings on the meter. Approx flow required for TIG welding = 5 - 8 l/min and for MIG approx 10x the wire diameter e.g. 1mm wire = 10l/min. - Manufacturers part numbers: GYS_|053939

• Easy to clean.
• From 0 to 25 l/min, in 5 increments.
• Very easy to use.
• Measure the gas flow (l/min) at the burner outlet with the ball.
• Insert the burner nozzle vertically into the tester.
• The flow meter with ball float allows you to check the gas flow rate on the burner to detect any leaks.