SPAX Wirox Chipboard Screws Torx All Sizes 3x30-6x260 Wood Screws b

The SPAX Wirox T-Star Flat Countersunk Timber Screws are designed to be used for the fastening of timber components including timber beams boards and joists. T-STAR plus recess increses contact surface for optimal drive and transmission force with a WIROX high corrosion protection and 4-CUT point to reduce screwing in torque and reduced splitting of timber. - Manufacturers part number: 191010601505

• Box contents: 1 SPAX box, pack of 100 universal screws, T-Star plus, countersunk head, partial thread, 4CUT, Wirox surface, thread diameter (Ød1) = 6 mm x total length (Ls) = 150 mm, partial thread length (LgT) = 68 mm, head diameter (Ødk): 11.6 mm, bit not included
• Made in Germany: TÜV certified. Approved by building authorities: European technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114)
• Effortless work and longer battery life: no pre-drilling (depending on the wood). Easy penetration, reduction of the splitting effect thanks to 4CUT: Four edges in the screw tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile
• As a multi-head pronounced countersunk head for flush countersinking and comfortable processing, milled in wood, brakes on metal. Optimum power transmission and clean fit even when processing overhead with SPAX bit T-Star plus T30 with guide pins
• Use: universal indoor and outdoor use without direct weathering. Spax-exclusive Wirox surface: 20 times higher corrosion protection compared to conventional bare zinc plating than required by standard