Spax A2 Stainless Steel Washer Head Torx Wood Construction Screws 6mm 100mm

6mm Washer-head screws with true universal applications high load capacity "the modern equivalent to a coach screw"Features:- Washer-head design gives increased pull down and pull through capacity- 4CUT point: No pre-drilling even... - Manufacturers part numbers: 257000601005|1596F

• Box contents: 1 SPAX box, pack of 100 wood screws, T-Star plus, flat head, partial thread, 4Cut, stainless steel A2, material quality: 1.4567, thread diameter (Ød1) = 6 mm x total length (Ls) = 100 mm, partial thread length (LgT) = 61 mm, head diameter (Ødk): 13.6 mm, bit not included included
• Made in Germany: TÜV certified. Approved by building authorities: European technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114)
• Effortless work and longer battery life: no pre-drilling (depending on the wood). Easy penetration, reduction of the splitting effect thanks to 4CUT: Four edges in the screw tip. Easier cutting of the wood fibre thanks to Spax wave profile
• Higher head pulling forces thanks to plate head. Optimum power transmission and clean fit even when processing overhead with SPAX bit T-Star plus T30 bit with guide pins
• Use: For easy screwing of steel parts and sheets to wood. Better sealing of joints even with deformed woods. High corrosion resistance thanks to stainless steel A2