Knightsbridge SN9KW Smart 2G Socket, White, 8.0 mm*86.0 mm*146.0 mm

Upgrade any existing 2G socket position to a Smart solution - 230V, 13A (Max. Load 2990W) - Minimum Mounting Box Depth: 25-35mm (depending on wiring conditions) - Control an appliance, like a table lamp, or cabinet lighting from your smartphone or tablet via the SmartKnight app at home or away - Set up a schedule or use the timer function for things to switch on and off - A power monitoring function is also provided in the app (total usage) - Fully compatible with Amazon Alexa or Google Assistant. Just give a voice command to turn on/off the outlet (e.g. 'Alexa, turn off the living room lamp') - Wi-Fi Connectivity IEEE 802 11 b/g/n (2.4Ghz only) if you have a Dual Band system simply disable the 5Ghz frequency in your Wi-Fi Router* during set up and then enable again once set up is complete - 2 year warranty *check your router manual on how to do this or contact your ISPTechnical Specification:Projection (mm): 9Min. Mounting Box Depth (mm): 25-35mm (dependent on wiring conditions)Constr... - Manufacturers part numbers: SN9KW|Knightsbridge_SN9KW|SN9KW

• Note: These are not suitable for charging EV’s over a long period of time. The UK wiring regulations state that an electrical socket for use with EV’s should be identified as “Suitable for EV Charging” – these are not, but not all DIYer’s are aware of the UK wiring regulations
• Note-This is a technical product that requires good wifi signal and the user should be competent in working with electrical wiring installation.Also do not plug in electric cars to charge up
• Fully certified with amazon alexa or google assistant, just give a voice command to turn on/off the outlet (e.g. 'alexa, turn off the living room lamp')
• 230v, 13a, retrofit to 25mm back box, standard square edge moulded urea design with a 9mm projection, set up a schedule using the timer function for things to switch on and off, a power monitoring function is also provided in the app (total usage)
• Voltage: 220.0
• Wi-fi connectivity ieee 802 11 b/g/n (2.4ghz only) if one have a dual band system simply disable the 5ghz frequency in one's wi-fi router during set up and then enable again once set up is completecheck one's router manual on how to do this or contact one's isp