Azpects Easy Prime Bonding Agent - 15kg

The Easy Prime Porcelain Prime Slurry is an easy to apply high strength bonding agent for use when laying natural stone and porcelain paving. EASYPrime ensures full and permanent contact is achieved with the aggregated mortar in the bedding layer. - Manufacturers part number: 7020

• ABOUT US: At Azpects Ltd, we specialise in developing and manufacturing products to create and maintain outdoor hard-landscaping. Our mission is to deliver products that make typical construction and care challenges EASY and less frequent
• LARGE TUB: Each tub contains 3 separate x 5kg bags for minimal waste, only use what you need! Our tile adhesive is ready to mix with water. Coverage depends on the coated film depth and the porosity and texture of the rigid bound sub-base. As a guide, a single 5kg bag of EASYPrime will cover a minimum of approximately 8.0m2
• HOW TO USE: Using powered paddle mix 1x 5kg bag of EASYPrime with 2L of clean, cold water until smooth. Apply a layer of it onto the back of the floor tiles using brush or roller while leaving a gap around the edges. While still wet, lay paving and level into the bedding mortar
• SUITABLE FOR: Our outdoor tile adhesive is designed for use on all natural stone and porcelain paving. Ideal for pathways, driveways, garden patio and more. Great for indoor and exterior tiles, suitable for application in domestic, commercial and public areas
• FLOOR TILE ADHESIVE: EASYPrime is a polymer modified cementitious slurry primer. It is an easy to apply high strength bonding agent for use when laying natural stone and porcelain paving. Ensures full and permanent contact is achieved with the aggregated mortar in the bedding layer