Terma 200W Thermostat Temperature Control Dry Heating Element

Designed to work in combination with KTX controllers to provide a fully functioning heating element. Timer options will be determined by the model of KTX controller this probe is paired with. Straight cable with no plug. 285mm internal probe length. - Manufacturers part number: 259RH

• Dual Fuel Advice: If you are buying a heating element to convert a towel rail for use as dual fuel (electric in the summer and central heating in the winter) it is important to remember to regularly bleed the towel rail, as on a central heating system air can build up inside. A heating element should never be run in the open air as this could potentially cause the surface of the rail to get extremely hot and burn your towels.
• Wattage Selection Advice: For wattage look at the output of the chosen rad as c/heating in watts and choose an element with the wattage closest to that figure. For BTUS the conversion formula is BTUS / 3.41 = Watts. Electrification Advice: When making the decision to electrify any towel rail or radiator it is important to check with the manufacturer of that model that it is suitable to work with a heating element. Not all towel rails or radiators are suitable.
• Straight cable, no plug. Class 1. 285mm internal probe length.
• The Terma TS1 element probe is designed to work in combination with the KTX Range of Controllers to provide a fully functioning heating element. Timer options will be determined by the model of KTX Controller this probe is paired with.