Fischer Duoseal Universal Plug - 6 x 38mm - Pack of 50

The Fischer Duoseal Universal Plug is a 2 component plug which seals the drill hole in wet areas without any additional sealing compound. DuoSeal in combination with the enclosed screw is suitable for applications in commercial private and public wet areas which are frequently exposed to splash water and temporarily accumulated water. - Manufacturers part number: 557727

• The grooves in the plug shaft compensate for unevenness in the hole, so that the sealing function is guaranteed even if the drill hole is not perfect.
• The soft grey component is pressed against the drill hole wall by screwing in the screw and seals the drill hole completely.
• The red component made of high-quality nylon automatically activates the optimum function principle (spreading, folding, knotting) depending on the building material for best hold.
• The DuoSeal can be installed gently on tiles with just a few hammer blows. The rim of the shaft prevents the plug from being set too deep and additionally seals the drill hole.
• The DuoSeal is only suitable for application on tiles and can only be mounted as pre-position installation. A suitable diamond or tile drill should be used for drilling the hole.
• 91022001.001 e
• Gypsum block
• Chipboard
• Gypsum fibreboard
• Gypsum plasterboard
• Aerated concrete
• Perforated sand-lime brick
• Vertically perforated brick
• Light concrete (hollow brick)
• Light concrete (solid brick)
• Solid sand-lime brick
• Solid brick
• Concrete
• Tubes
• Kitchen accessories
• Hair dryer holders
• Shelves
• Mirrors
• Shower panels
• Faucets
• Accessories
• Laundry rooms
• Sports facilities
• Swimming pool surroundings
• Spas
• Kitchens
• Bathrooms
• The soft plastic rim closes the drill hole completely and flexibly adapts to the shape of the attachment part.
• The stainless steel screw included in the set is ideally suited for installation in wet areas and avoids rusting.
• It´s red component ensures a secure hold in all building materials. Thus, the DuoSeal achieves the same load values as conventional nylon plugs.
• The universal plug can be installed gently on tiles with very little effort.
• The DuoSeal is ideally suited for tiled surfaces which are exposed to very frequent splashing water and temporarily accumulated water.
• The DuoSeal completely seals drill holes in tiles without additional sealing compound and thus prevents structural damage caused by moisture in the building material.
• High load values due to the 2-component material.
• Suitable for all building materials.
• Quick and easy assembly by simply hammering in the plug.
• Watertightness approved according to ETAG 022 and DIN 18534 up to water exposure class W3-I. In any case, please take note of the general national regulations on the use of plugs in wet areas.
• Perfect sealing of the drill hole without any sealing compound.