FloPlast 492012 MDPE Coupler 25mm x 25mm (17684)

High quality compression fitting for MDPE pipe. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Excellent pressure resistance, tested to 48bar. Simple and quick to connect - no need to dismantle the connecter nor chamfer the pipe, just cut the pipe, lubricate the seal, undo the nut a few turns, insert the ... - Manufacturers part number: 492012

• This 25mm coupler has a co-polymer polypropylene Body, Body Nut and Guide Ring, Acetal Grab Ring and Nitrile Seal with a high Impact resistant Body and Nut which enables it to absorb thermal and mechanical stress.
• These 25mm water pipe connectors have a maximum operating pressure of 12.5 bar.
• These 25mm water pipe fittings are used with polyethylene pipes manufactured in accordance with the requirements of BS EN 12201 - 2 (BLUE).
• These 25mm MDPE water pipe fittings are WRAS approved and suitable for use below ground on cold water services
• This listing is for a single 25mm MDPE Pipe Coupler, please see product description for fitting description