Sealey GDM200F/VS Pillar Drill Floor Variable Speed 1630mm Height 650W/230V

• Variable speed model allows stepless control of drilling speed between minimum and maximum enabling finer control of finish and tolerance.• The belt transmission uses two spring tensioned cone pulleys, the diameter of which can be adjusted by moving a centre idle pulley with the speed adjustment control lever.• Safety devices fitted include a no-volt release switch, allowing insurance company approval for use in educational establishments.• Supplied with chuck guard.• Mortise attachment available, order Model No. MA10.• 16mm(5/8") Capacity chuck No. 2MT.• Height: 1630mm. • Spindle Centre to Column: 178mm.• Motor Power: 450W, Input Power: 650W.• Column Diameter: 80mm.• Spindle Travel: 80mm.• Weight: 71kg.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Variable speed model allows stepless control of drilling speed between minimum and maximum enabling finer control of finish and tolerance. The belt tra... - Manufacturers part numbers: GDM200F/VS|GDM200FVS

• Specifications:Model No: GDM200F/VSDrilling Capacity (Chuck Size): 16mmSpindle Nose Taper: MT2Swing: 436mmSpindle Centre to Column: 178mmSpindle Travel: 80mmNumber of Speeds: VariableSpeed Range: 150-2300rpmMaximum Distance Spindle to Table: 800mmMaximum Distance Spindle to Base: 1230mmWorking Table Surface Size: �310mmWorking Base Surface Size: 205 x 205mmOverall Base Size: 460 x 275mmColumn Diameter: �80mmCollar Diameter: �60mmOverall Height: 1630mmMotor Power (Start): 450W (650W)Supply:
• Supplied with chuck guard
• Safety devices fitted include a no-volt release switch, allowing insurance company approval for use in educational establishments
• The belt transmission uses two spring tensioned cone pulleys, the diameter of which can be adjusted by moving a centre idle pulley with the speed adjustment control lever
• Features:Variable speed model allows stepless control of drilling speed between minimum and maximum enabling finer control of finish and tolerance