EGLO connect.z Smart Home motion detector, ZigBee, battery-operated, app control, sensor for EGLO connect.z lights, white plastic, IP44

PIR sensor EGLO connect-z, IP44 The practical PIR sensor from the EGLO connect-z series is a perfect addition to all smart lights and lamps. The sensor can be used to program your own automations, which, for example, allow different lights in the same room to be switched on after motion is detected. Data Sensor: - Detection angle 120 - Detection range 12 meters - Light duration 20 seconds to 10 minutes Compatibility: - controllable with the free AwoX HomeControl app - compatible with smart home systems ... - Manufacturers part number: 99106

• There is no need to wire up the battery-operated motion detector (batteries included); Thanks to the included wall bracket, the motion sensor can be individually aligned up to 30° in all directions; Dimensions: length: 6 cm/ 2.4 inches, height: 6 cm/ 2.4 inches, projection: 4 cm/ 1.6 inches
• Dusk to dawn sensor: connected devices switch on automatically when brightness falls below the set value and off again when it exceeds the twilight threshold
• The smart motion sensor made of white plastic can be configurated with the free AwoX Home Control App and wirelessly controlled as it makes use of the ZigBee 3.0 standard; Connect your connect.z lighting to the system using the app so that the motion detector can switch them on and off automatically